| Resistance Range | 1KΩ-10KΩ | ||
| Resistance Tolerance | ±10% Standard | ||
| End Resistance | <3Ω | ||
| Resistance Taper | B(JIS LINEAR) | ||
| Independent Linearity | ±0.5% | ||
| Power Rating | 0.5W(70℃)0W(120℃) | ||
| Peak Noise (C.R.V.) | <2%Rn | ||
| Dielectric Strength | 1000V 1minute | ||
| Adjustment Travel | 90°120°200° 240° 300° 340° | ||
| Insulation Resistance | 10M | ||
| Resolution | Essentially infinite | ||
| Maximum Input Voltage | 200VDC | ||
| Environmental: | |||
| Storage Temperature Range | -60℃~+125℃ | ||
| Operating Temperature Range | -60℃~+125℃ | ||
| Temperature coefficient | 500ppm/℃ | ||
| Load Life | 70℃ 1,000h ΔR/R≤±10% | ||
| Rotational Life | 1,000,000, ΔR/R≤±7% | ||
| IP Range | IP25 | ||
| Soldering Heat Resistance | (350℃ 3S)ΔR/R≤±2% | ||
| Temperature Cycle | (-25℃,+85℃ 30min/each,5 cycles) ΔR/R≤±10% | ||
| Vibration | 10-55Hz, 1.5mm amplitude, 3.directions ΔR/R≤±5% | ||
| Mechanical: | |||
| SIZE | SEE DRAWING | ||
| Mechanical Travel | 220° 320° 360° | ||
| Shaft Torque | 25~35gf·cm | ||
| Stop Strength | …… | ||
| Mounting Nut Torque | 15Kgf·cm | ||
| Shaft Runout | 0.15mm | ||
| Shaft End Play | (shaft length 30 mm)0.15mm | ||
| Shaft Radial Play | 0.15mm | ||
| Shaft Strength (push) | 125 N (12.75 kgf ) min. | ||
| Shaft Strength (tensile) | 125 N (12.75 kgf ) min. | ||
| Marking | …… | ||
| Hardware. | Washer,Lockwasher, Nut | ||